DIN F4 PN10/PN16 Cast iron/ Ductile iron non-rising stem hard seal gate valve
Parameter of the products | ||||||
Design pressure | PN16 | |||||
Application for | Water,oil &gas | |||||
Shell Test | 2.4Mpa | |||||
Seal Test | 1.76Mpa |
1 | Face to face DIN3202-F4 | |||||
2 | Flange drilled DIN2532/2533/2501 |
Material Specification | ||||||
Part | Material | |||||
Body | Cast iron/Ductile iron | |||||
Disc | Cast iron/Ductile iron | |||||
Seat | Brass/Bronze | |||||
Stem | SS | |||||
Gland | Cast iron/Ductile iron | |||||
Handwheel | Cast iron/Ductile iron |
Dimensions L:face to face ;PCD:Pitch Circle Diameter;FOD:Flange outside diameter | ||||||||||
DN | mm | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
inch | 2 | 2 1/2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | |
L | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | |
PCD PN10 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 | |
PCD PN16 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 | |
FOD | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 |
Please fill in your procurement needs and contact information